Enviroswim oxidiser display numbers are unstable & fluctuating.

Solution

The most common cause of fluctuating oxidiser display is scale build up on the cell plates and flow sensor.

Note: Scale build up is normally associated with pH operating at higher levels than recommended. If scale is allowed to accumulate on the oxidiser plates it will eventually cause damage and can cause plates to disintegrate. This will void any warranty on the oxidiser plates.

Remedy: Clean cell plates & sensor. Refer to manuals.

 
Was this article helpful? yes / no
 

 
Powered by Help Desk Software HESK, brought to you by SysAid